1944 Service Shots

141 – Flywheel Assembly

FLYWHEEL ASSEMBLY TIGHTENING OF PINION SHAFT, DRIVE SHAFT AND CRANKSHAFT INTO THE FLYWHEELS: (We recommend the use of a Torque...

142 – Pinion Shaft And Shifter Fork Crank Changes

PINION SHAFT AND SHIFTER FORK CRANK CHANGES On the 741 engines starting with the numbers GDA-32037, the flywheel pinion shafts...

147 – Change Oil To Prevent Motor Damage

CHANGE OIL TO PREVENT MOTOR DAMAGE Heavy cold oil will not flow from the oil tank through the oil lines...

148 – Precaution To Users of Leg Shields – Splash Shields – Large Wind Shields

PRECAUTION TO USERS OF LEG SHIELDS – SPLASH SHIELDS –LARGE WIND SHIELDS We sell these accessories to riders for protection...

149 – Connecting Rod Side Clearance or End Play

Number 149 December 25, 1944 CONNECTING ROD SIDE-CLEARANCE OR “END-PLAY” The recommended connecting rod side-clearances between the outside edge of...

144 – Installation Information For Indian Four Clutch Plate, Disc And Flywheel Assembly (1932-1941 Models)

143 – Generator Belt Part No. 42603

GENERATOR BELT PART NO. 42603 Because it was impossible for the belt manufacturers to supply us with the same belt...

145 – 344 Seat Post Springs

344 SEAT POST SPRINGS All new 344 machines being delivered have the heavy seat post spring assembly usually specified by...

146 – 344 Brake Drum Bearings (#40446)

344 BRAKE DRUM BEARINGS (#40446) The hydraulic grease fittings have been removed from 344 front, rear and sidecar wheel brake...