439 MAGNETOS
The ground wire running from the breaker bar assembly to the body of the magneto to insure e positive ground, and the primary lead wire from the breaker bar assembly to the condenser also attached to the magneto cutout post and running to the primary coil, has been lengthened out sufficiently that a large coil can be assembled between condenser and where the wire attaches on to the breaker bar.
Because of the action of the breaker bar assembly retarding and advancing spark, this wire in time would crystallize and break. The part number of these wires from the Edison catalog are as follows:
| Ground wire – 6946 – new type |
| Primary lead wire – 5932 new type |
These wires are available by contacting Edison Splitdorf Corporation, West Orange, New Jersey.
Leave a Comment