189 – Chek Model “B”

_{CHEK MODEL “B” ELECTRICAL WIRING DIAGRAM}

CHEK MODEL “B”

BATTERY CHARGING CIRCUIT

When the switch is in “off” position, terminals 2 and 5 are connected, making a circuit from the generator through the
choke coil, rectifier and fuse to the battery. This circuit charges the battery during daylight riding.

HEADLIGHT AND TAILLIGHT CIRCUIT

When the switch is turned to the left, terminals 1 and 4 are connected to make a circuit from the generator to the HI-LO beam switch and headlight. The switch in the same position connects terminals 8 and 6 which makes a circuit from the battery to the taillight.

N0TE: There is no current going into the battery when the switch is in this position.

PARKING LIGHT AND TAILLIGHT CIRCUIT

When the switch is turned to the left, terminals 6 and 3 are connected to make the circuit from the battery to the parking light. The switch in the same position connects terminals 10 end 8 to complete the circuit from the battery to the taillight.

NOTE: There is no current going into the battery when the switch is in this position.

Walter Brown
Service Manager

PAGE 2, SEE DIAGRAM ABOVE